YouLess

The YouLess integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] for Home Assistant allows you to read the meter values from sensors created by YouLess.

The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] is tested and verified for the following devices from YouLess:

  • LS110
  • LS120 running PVOutput firmware
  • LS120 running Enologic firmware

Configuration

To add the YouLess device to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] will create sensors for you to display:

  • The current power usage
  • The gas meter
  • The water meter
  • The current meter value (including high and low)
  • The delivery meter value, for Solar power

Changing the IP address of the device

The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] stores the hostname or IP address you entered during setup and does not update it when the device gets a different IP address: it has no reconfigure option and does not discover the device on the network. To use the new address, remove the integration entry as described below and add the integration again with the new address. The sensors keep their entity IDs, because their unique IDs are based on the device’s MAC address rather than its network address.

To avoid this, give the YouLess device a fixed IP address with a DHCP reservation in your router, or enter its hostname instead of its IP address when you set up the integration.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. Next to the entry you want to remove, select the three dots menu. Then, select Delete.
    • Depending on the integration, the entries are listed under one of the following headings:
      • Devices
      • Hubs
      • Services
      • Integration entries
  3. To confirm, select Delete.
    • Home Assistant also deletes the devices and entities of the entry.
  4. If Home Assistant asks you to restart, restart Home Assistant.
  5. If Home Assistant asks whether to also delete the application credentials, select Remove or Keep.