2025.12.0
Home ▸ Integrations ▸

Victron BLE

The Victron BLE integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] integrates Victron Energy devices that support the BLE protocol into Home Assistant.

Configuration

To add the Victron BLE device to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & Services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select Victron BLE.

  • Follow the instructions on screen to complete the setup.

The Victron BLE integration will automatically discover devices once the Bluetooth integration is enabled and functional.

Adding a device

To configure a discovered device, you will need to supply the per-device encryption key. For more information, see these instructions.

To get the encryption key, use the VictronConnect app (Android, iOS, Linux, macOS, Windows):

  1. Install the VictronConnect app, ideally on the device you are using to set up this integration so you can simply cut and paste the key.
  2. Open the app and pair with your device.
  3. From the list, select the device that you want to monitor.
  4. To open the Settings for that device, select the gear icon.
  5. Open the menu and select Product Info.
  6. Scroll down to Instant Readout via Bluetooth and enable the feature (if it is not already enabled).
  7. To display the encryption key, next to Instant Readout Details, select Show.

Data updates

This integration subscribes to passive Bluetooth updates and will update the sensors as often as the updates are received.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.