iNELS
The iNELS integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to control and monitor the devices connected to your control units (BUS
There is currently support for the following device types within Home Assistant:
- Switch
Prerequisites
- MQTT broker.
- eLAN devices flashed with version
mqtt_1.0or later. - BUS devices flashed with version
mqtt_1.0or later. - See the Wiki page
for instructions on how to configure the control units.
Configuration
To add the iNELS integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select iNELS.
-
Follow the instructions on screen to complete the setup.
Removing the integration
This integration follows standard integration removal.
To remove an integration instance from Home Assistant
- Go to Settings > Devices & services and select the integration card.
- From the list of devices, select the integration instance you want to remove.
- Next to the entry, select the three dots
menu. Then, select Delete.
To remove a setting from eLANRF
- Launch the IDM application.
- Select Configuration of the central unit from the menu.
- Select MQTT settings then choose Not Connect in the mode options and click Save to CU.
To remove a setting from CU3
- Open the eLANRF web interface.
- Go to Settings and disable MQTT under MQTT connection.