2026.4.1
Home ▸ Integrations

Jandy iAqualink

iAqualink by Jandy allows you to control your pool anytime, anywhere.

There is currently support for the following device types within Home Assistant:

  • Binary sensor
  • Climate
  • Light
  • Sensor
  • Switch

Configuration

To add the Jandy iAqualink hub to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select Jandy iAqualink.

  • Follow the instructions on screen to complete the setup.

Known limitations

Only iAquaLink 2.0 (iQ20) and eXO systems are supported at this time.

If you need support for other systems, please open a request in the iaqualink-py Python library repository.

Debugging integration

If you have problems with iAqualink or the integration you can add debug prints to the log.

logger:
  default: info
  logs:
    iaqualink: debug
    homeassistant.components.iaqualink: debug

Removing the integration

This integration follows standard integration removal.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.