2025.11.0
Home ▸ Integrations ▸

Actron Air

The Actron Air integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to control Actron Air Air Conditioning controllers into Home Assistant.

Prerequisites

You must have an Actron Air Air-Conditioner with the Neo tablet wall controller, an active internet connection, and be registered to an email address.

Supported devices

This integration currently supports the Actron Air Neo controller, however other units are intended to be supported soon.

Configuration

To add the Actron Air integration to your Home Assistant instance, use this My button:

Actron Air can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & Services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select Actron Air.

  • Follow the instructions on screen to complete the setup.

Supported functionality

Climate

The integration will create a climate entity for the main air conditioning system found and for each zone. The main air conditioner unit will be reflected based on the name in the Actron Air Neo app. You can set the temperature, operation mode, and fan speed through this entity.

Each zone will be reflected as a separate climate entity. You can set the temperature and operation mode per zone (if supported by your air conditioner).

Removing the integration

This integration follows standard integration removal.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.