This is a guest post by Home Assistant users Jeremiah Wuenschel and St. John Johnson.

So you own a SmartThings Hub. You probably bought it when you were looking to get into the whole Home Automation hobby because it worked with pretty much everything and offered you the ability to automate anything. After a week of ownership, you realized that building dashboards and automating required writing way more Groovy then you expected. Then one day you were browsing reddit and discovered the amazingness that is Home Assistant! A solution that offered dashboards, graphs, working support for Nest, and REAL EASY automation!

You spent your weekend getting everything set up, showing it off to your significant other, but in the end you got stumped when it came to integrating with all your existing SmartThings toys. What do I do now? Should I buy another hub? Should I just buy a Z-Wave stick?

That’s where we came in. We wanted a solution that can bridge the awesomeness of Home Assistant with the SmartThings hub that works with almost everything.

Read on →

Another sprint has come to an end and it seems that we have not slowed down a single bit 🚀. 0.12 is full of new components, platforms and organizational additions.

I would like to give a shout out to Greg Dowling (@pavoni) as every release includes new work from him. He is constantly adding support for new platforms or improving the reliability of existing components and platforms. Keep up the good work!

This release includes a very frequent requested feature: the ability to organize entities in different tabs in the frontend. See the demo to see this in action and read more in the group documentation how to get started.

Example of the new views in the frontend. Learn more.

• Binary sensor: command sensor added (@Bart274)
• Nest support extended to include sensors and binary sensors (@joshughes)
• Light: LIFX platform added (@TangoAlpha)
• Notify: Twitter platform added (@HydrelioxGitHub)
• Sensor: Template platform added (@pavoni)
• Switch: Wink platform now supports sirens (@w1ll1am23)
• Insteon hub support added (@FreekingDean)
• Statsd component added (@michaelkuty)
• Light: Rfxtrx platform now supports dimming (@turbokongen)
• Time scheduling (including time automation) now works with intervals (ie. /5) (@kennedyshead)
• Sensor: onewire support added (@deisi)
• Zigbee support added (@flyte)
• Device Tracker: OwnTracks can now track iBeacons (@pavoni)
• Notify: Google Voice SMS platform added (@w1ll1am23)
• Toggle service added to homeassistant, switch, light and media_player (@rmkraus)
• Thermostat services added to control fans (@auchter)
• Improved Python automation: Event helpers are now also available as decorators for custom components (@rmkraus)
• Frontend: support added for tabs to show different views of your house (@balloob)
• Bugfixes by @molobrakos, @MartinHjelmare, @pavoni, @trollkarlen, @zmrow, @maddox, @persandstrom, @happyleavesaoc, @balloob, @fabaff, @stefan-jonasson, @haraldnagel.

Backwards incompatible changes

• Nest config has moved from thermostat to the Nest component.
• Entity IDs for Z-Wave devices are now generated in a deterministic way causing all IDs to change starting this release. This is a one time change. (Changed again in 0.31)

People often ask me about my vision for Home Assistant. Before I can describe where I want to go with Home Assistant, I should first talk about how home automation would look in my ideal world. This will be the aim of this post. I’m not going to focus on protocols, networks or specific hubs. That’s all implementation details. Instead, this post will focus on what is most important: the interaction between the users and their home.

You should not have to adapt to technology.

When people start using home automation, they always experience home control first: being able to control devices in new ways using a phone or computer. They believe the future is now and their app will be their remote for their lives. They only focus on what they are getting, not on what they are losing. You install some light bulbs and all of a sudden you are no longer able to use the light switches. You’ll arrive at home at night and have to pull out your phone, open the app, let it connect and finally you’ll be able to turn on the light. All while turning the light on could have been a switch away.

Yes, you can solve this with presence detection. What if your phone runs out of battery? You’ll have to resort to the switch again.

If you find that using your new home devices is cumbersome, the promise of home automation technology has failed you. Your lights should work with both a switch (or button) at the entrance of your room and via presence detection. Honestly, there are hardly any valid use cases for being able to control lights from your phone except for showing off.

Read on →

First release of 2016 and we are on 🔥! The main repository has passed 2500 ⭐ on GitHub (2596 ⭐ as of now). This release also has a record number of 20 contributors all working on improving and extending Home Assistant. With the continued growth, I am very excited to see what 2016 will bring us 🤘.

• MySensors revamped and switch support added (@MartinHjelmare)
• Full refactor of RPi GPIO. Now includes binary sensor and switch (@sfam)
• Sensor: [YR] platform added (@danielhiversen)
• Device Tracker: Geofancy platform has been renamed to Locative (@philipbl)
• Automation: Add sun condition (@philipbl)
• Switch: command_switch can now poll for state (@happyleavesaoc)
• Switch: wemo now uses subscription to states instead of polling (@pavoni)
• Telldus Live support added (@molobrakos)
• Vera now uses subscription to states instead of polling (@pavoni)
• New template helper method is_state_attr(entity_id, name, value) added (@andythigpen)
• Device tracker: OwnTracks transition events now supported (@xifle)
• Light: Philips Hue platform now supports multiple hubs (@rhooper)
• Notify: Free Mobile platform added (@HydrelioxGitHub)
• New MQTT Eventstream component to connect two Home Assistant instances over MQTT (@moonshot)
• Media player: Cast huge stability improvements (@rmkraus)
• Media Player: Universal media player added to combine multiple media players (@rmkraus)
• Sensor: Netatmo platform added (@HydrelioxGitHub)
• Alarm Control Panel: [Alarm.com] platform added (@Xorso)
• Thermostat: Proliphix platform added (@sdague)
• New component input_boolean will allow for customizing automation (@balloob)
• Support calling services via Amazon Echo (@balloob)

Backwards incompatible changes

• The RPi.GPIO sensor platform has been moved to the binary_sensor component.
• MySensors sensor platform now requires the MySensors component to be configured.
• Geofancy platform has been renamed to Locative.

Alrighty, it’s time for Home Assistant 0.10. A lot amazing things have changed and sadly we also had to introduce a bunch of backwards incompatible changes. I would like to give a big shoutout to Philip Lundrigan (@philipbl) who put a lot in effort in helping the migration to move towards using templates for a wide variety of platforms.

• Device tracker: iCloud platform added (@xorso, @kevinpanaro)
• Frontend: Improved caching using service workers if served over SSL (@balloob)
• Sensor: Twitch platform added (@happyleavesaoc)
• Template support (@balloob, @philipbl, @fabaff)
• Thermostat: Heatmiser platform added (@andylockran)
• Sensor: Dweet.io platform added (@fabaff)
• Alexa/Amazon echo component added (@balloob)
• Device Tracker: FritzBox platform added (@deisi, @caiuspb)
• Sensor: Wink now supports the Egg minders (@w1ll1am23)
• Sensor: ELIQ Online platform added (@molobrakos)
• Binary sensor: REST platform added (@fabaff)
• Sensor: Torque (OBD2) platform added (@happyleavesaoc)

Read on →

Exposing your Home Assistant instance outside of your network always has been tricky. You have to set up port forwarding on your router and most likely add a dynamic DNS service to work around your ISP changing your IP. After this you would be able to use Home Assistant from anywhere but there is one big red flag: no encryption.

This tutorial will take you through the steps to setup a dynamic DNS for your IP and allow trusted encrypted connection to it - for free using DuckDNS and Let’s Encrypt.

Read on →

Update Dec 16: Great news! Philips has decided to reverse their decision and is working on a software update to allow 3rd party light bulbs again.

Philips Hue FAQ entries regarding reversing the decision.

Original post:

Read on →

In this tutorial I will explain how you can activate Tasker tasks from Home Assistant command line switches. We are going to set up a switch that when toggled will make your Android device say either "On" or "Off".

You could also do this with the automation component instead so whenever you put your house to sleep mode for example your Android device will open up Google Play Books or the Kindle app ready for you to read as well as dimming your lights, but this tutorial is all about the switches.

Read on →

The InfluxDB database is a so-called time series database primarily designed to store sensor data and real-time analytics.

The influxdb component makes it possible to transfer all state changes from Home Assistant to an external InfluxDB database.

Read on →

It’s been a few weeks but we managed to polish a nice new release of Home Assistant for y’all!

• New lock component including Wink support (@miniconfig)
• New binary sensor component including aRest and MQTT support (@fabaff)
• New rollershutter component including MQTT support (@sfam)
• New InfluxDB component to store data in InfluxDB (@fabaff)
• Thermostat: Ecobee now supported (@nkgilley)
• Thermostat: Homematic now supported (@goir)
• Support for parsing JSON values received over MQTT (@mcdeck)
• Bunch of bug fixes and optimizations

To update, run pip3 install --upgrade homeassistant.