Xiaomi Miio

The Xiaomi Miio integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] supports the following devices:

• Xiaomi Gateway
• Xiaomi device tracker (Xiaomi Mi WiFi Repeater 2)
• Xiaomi Air Purifier, Air Humidifier and Standing Fan
• Xiaomi Air Quality Monitor
• Xiaomi IR Remote
• Xiaomi Mi Robot Vacuum
• Xiaomi Philips Light
• Xiaomi Smart WiFi Socket and Smart Power Strip

Prerequisites

Most Xiaomi Miio devices support configuration using the Home Assistant UI, except for the Xiaomi device tracker and Xiaomi IR Remote. Please read the linked sections for those devices for more information.

Devices need to be set up using the Mi Home app and not vendor-specific apps (e.g. Roborock).

Configuration

To add the Xiaomi Miio integration to your Home Assistant instance, use this My button:

Xiaomi Miio can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

It is recommend to supply your Xiaomi cloud credentials during configuration to automatically connect to your devices. You need to specify the cloud server you used in the Xiaomi Home App (where you initially setup the device). There are 6 servers: cn, de, i2, ru, sg and us; please see this page for the server to use for each country.

Troubleshooting

The most common problems are:

• Xiaomi Miio devices do not communicate across subnets/VLANs due to the source address of the UDP packet not belonging to the subnet of the device itself, more information and solutions.
• Roborock vacuums need to be connected to the Xiaomi Home app, not the Roborock app, more information.
• Blocking the network access to the device is known to cause intermittent connection issues due to the device’s internal software hanging and a watchdog restarting the internal software, more information.

Xiaomi Gateway

The xiaomi_miio gateway integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to control the gateway and its connected subdevices.

Supported Xiaomi gateway models

The following list shows the Gateway name, the model number, the Zigbee ID, and whether the model is supported or not in Home Assistant.

• Chinese version

  • Model: DGNWG02LM
  • Zigbee ID: lumi.gateway.v3
  • Supported: Yes

• European version

  • Model: ZHWG11LM-763 / DGNWQ05LM
  • Zigbee ID: lumi.gateway.mieu01
  • Supported: Yes (cloud credentials needed)

• Aqara hub

  • Model: ZHWG11LM
  • Zigbee ID: lumi.gateway.aqhm01
  • Supported: Yes

• Mijia Zigbee 3.0

  • Model: ZNDMWG03LM
  • Zigbee ID: lumi.gateway.mgl03
  • Supported: Yes

• Aqara AC Companion

  • Model: KTBL01LM
  • Zigbee ID: lumi.acpartner.v1
  • Supported: Untested

• Mi AC Companion

  • Model: KTBL02LM
  • Zigbee ID: lumi.acpartner.v2
  • Supported: Untested

• Aqara AC Companion

  • Model: KTBL11LM
  • Zigbee ID: lumi.acpartner.v3
  • Supported: Yes

Some gateways (lumi.gateway.mieu01) do not support getting the connected subdevices locally. For those gateways, cloud credentials can be specified during the config flow and the “Use cloud to get connected subdevices” can be enabled in the options flow (after setting up the integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more], click Configuration in the sidebar, then click Integrations and then click Options on the already set up Xiaomi Miio Gateway integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more]). The connected subdevices will then be retrieved from the Xiaomi Miio cloud (internet), control and status updates of those subdevices will then further take place over local network connection. A re-authentication flow may be triggered when no cloud credentials are provided yet and are needed for that particular gateway model.

Gateway features

• Gateway alarm control (Turn on/off; see status armed_away, disarmed, arming)
• Gateway light control (Turn on/off; change brightness; change color; see status)
• Gateway illuminance sensor readout (illuminance value in lux)

Not yet implemented features (but possible):

• Gateway internet radio (only chinese stations)
• Gateway ringtones/sounds

Supported subdevices

These subdevices are fully implemented in HomeAssistant:

• Weather sensor (WSDCGQ01LM)
  • Zigbee ID: lumi.sensor_ht
  • Features: readout temperature and humidity
• Weather sensor (WSDCGQ11LM)
  • Zigbee ID: lumi.weather.v1
  • Features: readout temperature, humidity and pressure
• Wall switch single (QBKG11LM)
  • Zigbee ID: lumi.ctrl_ln1
  • Features: load_power, status, turn_on, turn_off, toggle
• Wall switch single (QBKG11LM)
  • Zigbee ID: lumi.ctrl_ln1.aq1
  • Features: load_power, status, turn_on, turn_off, toggle
• Wall switch no neutral (QBKG04LM)
  • Zigbee ID: lumi.ctrl_neutral1.v1
  • Features: status, turn_on, turn_off, toggle
• Wall switch double (QBKG12LM)
  • Zigbee ID: lumi.ctrl_ln2
  • Features: load_power, status, turn_on, turn_off, toggle
• Wall switch double (QBKG12LM)
  • Zigbee ID: lumi.ctrl_ln2.aq1
  • Features: load_power, status, turn_on, turn_off, toggle
• Wall switch double no neutral (QBKG03LM)
  • Zigbee ID: lumi.ctrl_neutral2
  • Features: status, turn_on, turn_off, toggle
• D1 wall switch triple (QBKG26LM)
  • Zigbee ID: lumi.switch.n3acn3
  • Features: load_power, status, turn_on, turn_off, toggle
• D1 wall switch triple no neutral (QBKG25LM)
  • Zigbee ID: lumi.switch.l3acn3
  • Features: load_power, status, turn_on, turn_off, toggle
• Wall outlet (QBCZ11LM)
  • Zigbee ID: lumi.ctrl_86plug.v1
  • Features: status, turn_on, turn_off, toggle
• Wall outlet (QBCZ11LM)
  • Zigbee ID: lumi.ctrl_86plug.aq1
  • Features: load_power, status, turn_on, turn_off, toggle
• Plug (ZNCZ02LM)
  • Zigbee ID: lumi.plug
  • Features: load_power, status, turn_on, turn_off, toggle
• Relay (LLKZMK11LM)
  • Zigbee ID: lumi.relay.c2acn01
  • Features: load_power, status, turn_on, turn_off, toggle
• Smart bulb E27 (ZNLDP12LM)
  • Zigbee ID: lumi.light.aqcn02
  • Features: on/off, brightness, color temperature
• IKEA smart bulb E27 white (LED1545G12)
  • Zigbee ID: ikea.light.led1545g12
  • Features: on/off, brightness, color temperature
• IKEA smart bulb E27 white (LED1546G12)
  • Zigbee ID: ikea.light.led1546g12
  • Features: on/off, brightness, color temperature
• IKEA smart bulb E12 white (LED1536G5)
  • Zigbee ID: ikea.light.led1536g5
  • Features: on/off, brightness, color temperature
• IKEA smart bulb GU10 white (LED1537R6)
  • Zigbee ID: ikea.light.led1537r6
  • Features: on/off, brightness, color temperature
• IKEA smart bulb E27 white (LED1623G12)
  • Zigbee ID: ikea.light.led1623g12
  • Features: on/off, brightness, color temperature
• IKEA smart bulb GU10 white (LED1650R5)
  • Zigbee ID: ikea.light.led1650r5
  • Features: on/off, brightness, color temperature
• IKEA smart bulb E12 white (LED1649C5)
  • Zigbee ID: ikea.light.led1649c5
  • Features: on/off, brightness, color temperature

Recognized subdevices (not yet implemented)

These subdevices are recognized by the python-miio code but are still being worked on (not yet implemented).

The list shows the device name, the model number, and the Zigbee ID.

• Button (WXKG01LM): lumi.sensor_switch
• Button (WXKG11LM 2015): lumi.sensor_switch.aq2
• Button (WXKG12LM): lumi.sensor_switch.aq3
• Button (WXKG11LM 2018): lumi.remote.b1acn01
• Cube (MFKZQ01LM): lumi.sensor_cube.v1
• Cube (MFKZQ01LM): lumi.sensor_cube.aqgl01
• Motion sensor (RTCGQ01LM): lumi.sensor_motion
• Motion sensor (RTCGQ11LM): lumi.sensor_motion.aq2
• Door sensor (MCCGQ01LM): lumi.sensor_magnet
• Door sensor (MCCGQ11LM): lumi.sensor_magnet.aq2
• Vibration sensor (DJT11LM): lumi.vibration.aq1
• Honeywell smoke detector (JTYJ-GD-01LM/BW): lumi.sensor_smoke
• Honeywell natural gas detector (JTQJ-BF-01LM/BW): lumi.sensor_natgas
• Water leak sensor (SJCGQ11LM): lumi.sensor_wleak.aq1
• Remote switch single (WXKG03LM 2016): lumi.sensor_86sw1.v1
• Remote switch single (WXKG03LM 2018): lumi.remote.b186acn01
• D1 remote switch single (WXKG06LM): lumi.remote.b186acn02
• Remote switch double (WXKG02LM 2016): lumi.sensor_86sw2.v1
• Remote switch double (WXKG02LM 2018): lumi.remote.b286acn01
• D1 remote switch double (WXKG07LM): lumi.remote.b286acn02
• Curtain (ZNCLDJ11LM): lumi.curtain
• Curtain (ZNGZDJ11LM): lumi.curtain.aq2
• Curtain B1 (ZNCLDJ12LM): lumi.curtain.hagl04
• Door lock S1 (ZNMS11LM): lumi.lock.aq1
• Door lock S2 (ZNMS12LM): lumi.lock.acn02
• Door lock S2 pro (ZNMS13LM): lumi.lock.acn03
• Vima cylinder lock (A6121): lumi.lock.v1
• Thermostat S2 (KTWKQ03ES): lumi.airrtc.tcpecn02

Xiaomi device tracker (Xiaomi Mi WiFi Repeater 2)

The xiaomi_miio device tracker platform is observing your Xiaomi Mi WiFi Repeater 2 and reporting all associated WiFi clients.

Please follow the instructions on Retrieving the Access Token to get the API token.

To add a Xiaomi Mi WiFi Repeater device tracker to your installation, add the following to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file:

device_tracker:
  - platform: xiaomi_miio
    host: 192.168.130.73
    token: YOUR_TOKEN

Xiaomi Air Purifier, Air Humidifier and Standing Fan

The Air Purifiers, Air Humidifiers and Standing Fans use multiple platforms to allow you to set the control modes and settings of the device.

Supported devices:

The list includes device name, model number (if available), and model.

• Air Purifier: zhimi.airpurifier.v1

• Air Purifier 2 (FJY4006CN): zhimi.airpurifier.v2

• Air Purifier V3: zhimi.airpurifier.v3

• Air Purifier V5: zhimi.airpurifier.v5

• Air Purifier Pro: zhimi.airpurifier.v6

• Air Purifier Pro V7: zhimi.airpurifier.v7

• Air Purifier 2 (mini): zhimi.airpurifier.m1

• Air Purifier (mini): zhimi.airpurifier.m2

• Air Purifier MA1: zhimi.airpurifier.ma1

• Air Purifier MA2: zhimi.airpurifier.ma2

• Air Purifier 2S: zhimi.airpurifier.mc1

• Air Purifier Super: zhimi.airpurifier.sa1

• Air Purifier Super 2: zhimi.airpurifier.sa2

• Air Purifier 3 (2019) (AC-M6-SC): zhimi.airpurifier.ma4

• Air Purifier 3H (2019): zhimi.airpurifier.mb3

• Air Purifier Pro H: zhimi.airpurifier.va1

• Air Purifier Pro H EU: zhimi.airpurifier.vb2

• Air Purifier 3C: zhimi.airpurifier.mb4

• Air Purifier 3C: zhimi.airp.mb4a

• Air Purifier ZA1: zhimi.airpurifier.za1

• Air Purifier 4 (AC-M16-SC): zhimi.airp.mb5

• Air Purifier 4 PRO (AC-M15-SC): zhimi.airp.vb4

• Air Fresh A1 (MJXFJ-150-A1): dmaker.airfresh.a1

• Air Fresh VA2: zhimi.airfresh.va2

• Air Fresh VA4: zhimi.airfresh.va4

• Air Fresh T2017 (MJXFJ-300-G1): dmaker.airfresh.t2017

• Air Humidifier: zhimi.humidifier.v1

• Air Humidifier CA1: zhimi.humidifier.ca1

• Air Humidifier CA4: zhimi.humidifier.ca4

• Air Humidifier CB1: zhimi.humidifier.cb1

• Air Humidifier JSQ: deerma.humidifier.jsq

• Air Humidifier JSQ1: deerma.humidifier.jsq1

• Air Humidifier MJJSQ: deerma.humidifier.mjjsq

• Standing Fan 1X: dmaker.fan.p5

• Inverter Pedestal Fan: zhimi.fan.za1

• Standing Fan 2: zhimi.fan.za3

• Standing Fan 2S: zhimi.fan.za4

• Standing Fan: zhimi.fan.sa1

• DC Pedestal Fan: zhimi.fan.v2

• DC Pedestal Fan: zhimi.fan.v3

• Standing Fan 1C: dmaker.fan.1c

• Tower Fan: dmaker.fan.p9

• Standing Fan 2: dmaker.fan.p10

• Standing Fan Pro: dmaker.fan.p11

• Standing Fan 3: zhimi.fan.za5

• Power (on, off)

• Operation modes (Auto, Silent, Favorite, Idle)

• Attributes (fan platform)

  • model
  • mode
  • sleep_time
  • sleep_mode_learn_count
  • extra_features
  • turbo_mode_supported
  • use_time
  • button_pressed
  • sleep_mode

• Number entities

• Sensor entities

• Filter Lifetime Remaining: The remaining life of the filter. Enabled by default.

• Filter Use: Filter usage time in hours. Enabled by default.

• Humidity: The current humidity measured. Enabled by default.

• Motor Speed: The current motor speed measured in rpm. Enabled by default.

• PM2.5: The current particulate matter 2.5 measured. Enabled by default.

• Purify Volume: The volume of purified air in cubic meter. Disabled by default.

• Temperature: The current temperature measured. Enabled by default.

• Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Air Purifier Pro (zhimi.airpurifier.v6)

• Power (on, off)
• Operation modes (Auto, Silent, Favorite)
• Attributes (fan platform)
  • sleep_time
  • sleep_mode_learn_count
  • extra_features
  • turbo_mode_supported
  • auto_detect
  • use_time
  • button_pressed
• Number entities

• Sensor entities

  • Filter Life Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Illuminance: The current illuminance measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Purify Volume: The volume of purified air in cubic meter. Disabled by default.
  • Second Motor Speed: The current second motor speed measured in rpm. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Air Purifier Pro V7 (zhimi.airpurifier.v7)

• Power (on, off)
• Operation modes (Auto, Silent, Favorite)
• Attributes (fan platform)
  • extra_features
  • turbo_mode_supported
  • button_pressed
• Number entities

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Illuminance: The current illuminance measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Second Motor Speed: The current second motor speed measured in rpm. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Air Purifier MA2 (zhimi.airpurifier.ma2)

• Power (on, off)
• Operation modes (Auto, Silent, Favorite)
• Attributes (fan platform)
  • extra_features
  • turbo_mode_supported
  • button_pressed
  • preset_modes
  • preset_mode
  • sleep_time
  • sleep_mode_learn_count
  • use_time
  • sleep_mode
  • friendly_name
  • supported_features

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Illuminance: The current illuminance measured on top of the device (0-200 lux). Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Air Purifier 2S (zhimi.airpurifier.mc1)

• Power (on, off)
• Operation modes (Auto, Silent, Favorite)
• Attributes (fan platform)
  • extra_features
  • turbo_mode_supported
  • button_pressed
• Number entities

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Air Purifier 3/3H (2019) (zhimi.airpurifier.ma4, zhimi.airpurifier.mb3)

This model uses newer MiOT communication protocol.

• Power (on, off)
• Operation modes (Auto, Silent, Favorite, Fan)
• Attributes (fan platform)
  • use_time
• Number entities

• Select entities

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Purify Volume: The volume of purified air in cubic meter. Disabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Air Purifier Pro H, Pro H EU (zhimi.airpurifier.va1, zhimi.airpurifier.vb2)

• Power (on, off)
• Operation modes (Auto, Silent, Favorite, Fan)
• Attributes (fan platform)
  • use_time
• Number entities

• Select entities

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Purify Volume: The volume of purified air in cubic meter. Disabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Air Purifier 3C (zhimi.airpurifier.mb4, zhimi.airp.mb4a)

• Power (on, off)
• Operation modes (Auto, Silent, Favorite)
• Number entities

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.

• Switch entities

Air Purifier ZA1 (zhimi.airpurifier.za1)

• Power (on, off)
• Operation modes (Auto, Silent, Favorite)
• Number entities

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • TVOC: The current concentration of Total Organic Volatile Components. Enabled by default.

• Switch entities

• Select entities

Air Purifier V3 (zhimi.airpurifier.v3)

• Power (on, off)

• Operation modes (Auto, Silent, Favorite, Idle, Medium, High, Strong)

• Attributes (fan platform)

  • sleep_time
  • sleep_mode_learn_count
  • extra_features
  • use_time
  • button_pressed

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Illuminance: The current illuminance measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Purify Volume: The volume of purified air in cubic meter. Disabled by default.
  • Second Motor Speed: The current second motor speed measured in rpm. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Air Purifier 4/4 PRO (zhimi.airp.mb5, zhimi.airp.vb4)

These models use newer MiOT communication protocol.

• Power (on, off)
• Operation modes (Auto, Silent, Favorite, Fan)
• Attributes (fan platform)
• Number entities

• Select entities

• Sensor entities

  • Filter Lifetime Remaining: The remaining lifetime of the filter in %. Enabled by default.
  • Filter Time Left: The remaining lifetime of the filter in days. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Motor Speed: The current motor speed measured in rpm. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • PM10: The current particulate matter 10 measured (4 PRO only). Enabled by default.
  • Purify Volume: The volume of purified air in cubic meter. Disabled by default.
  • Temperature: The current temperature measured. Enabled by default.

• Switch entities

Air Fresh A1 (dmaker.airfresh.a1)

• Power (on, off)
• Operation modes (Auto, Sleep, Favorite)
• Binary sensor entities

• Button entities

• Sensor entities

• Switch entities

Air Fresh VA2

• Power (on, off)

• Operation modes (Auto, Silent, Interval, Low, Middle, Strong)

• Attributes (fan platform)

  • use_time
  • extra_features

• Sensor entities|

  • Carbon Dioxide: The current carbon dioxide measured in ppm. Enabled by default.
  • Filter Lifetime Remaining: The remaining lifetime of the filter. Enabled by default.
  • Filter Use: Filter usage time in hours. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • PM2.5: The current particulate matter 2.5 measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Select entities

• Switch entities

Air Fresh VA4

• Power (on, off)
• Operation modes (Auto, Silent, Interval, Low, Middle, Strong)
• Attributes (fan platform)
  • use_time
  • extra_features
• Sensor entities

• Select entities

• Switch entities

Air Fresh T2017 (dmaker.airfresh.t2017)

• Power (on, off)

• Operation modes (Auto, Sleep, Favorite)

• Binary sensor entities

  • Auxiliary Heat Status: Indicates if the heater is actually on

• Button entities

  • Reset Dust Filter: Resets filter lifetime and usage of the dust filter
  • Reset Upper Filter: Resets filter lifetime and usage of the upper filter

• Select entities

  • Auxiliary Heat Level: Controls the level of the heater (Low, Medium, High)
  • Display Orientation: Controls the orientation of the display (Forward, Left, Right)

• Sensor entities

  • Carbon Dioxide: The current carbon dioxide in ppm
  • Dust filter lifetime remaining: The remaining lifetime of the dust filter
  • Dust filter lifetime remaining days: The remaining lifetime of the dust filter in days
  • Upper filter lifetime remaining: The remaining lifetime of the upper filter
  • Upper filter lifetime remaining days: The remaining lifetime of the upper filter in days
  • PM2.5: The current particulate matter 2.5
  • Temperature: The current outside temperature
  • Control Speed: The current motor speed in rpm
  • Favorite Speed: The favorite motor speed in rpm

• Switch entities

Air Humidifier (zhimi.humidifier.v1)

• On, Off
• Operation modes (Silent, Medium, High, Strong)
• Target humidity (30, 40, 50, 60, 70, 80)
• Attributes (humidifier platform)

• Binary sensor entities

• Select entities

• Sensor entities

  • Humidity: The current humidity measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.
  • Water Level: The current water level percentage measured. Enabled by default.

• Switch entities

Air Humidifier CA (zhimi.humidifier.ca1)

• On, Off
• Operation modes (Silent, Medium, High, Auto)
• Target humidity (30, 40, 50, 60, 70, 80)
• Attributes (humidifier platform)

• Binary sensor entities

• Select entities

• Sensor entities

  • Humidity: The current humidity measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.
  • Water Level: The current water level percentage measured. Enabled by default.

• Switch entities

Air Humidifier CA (zhimi.humidifier.ca4)

• On, Off
• Operation modes (Auto, Low, Medium, High)
• Target humidity (30 - 80)
• Attributes (humidifier platform)

• Binary sensor entities

• Number entities

• Select entities

• Sensor entities

  • Actual Speed: The current motor speed measured in rpm. Enabled by default.
  • Humidity: The current humidity measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.
  • Water Level: The current water level percentage measured. Enabled by default.

• Switch entities

Air Humidifier CB (zhimi.humidifier.cb1)

• On, Off
• Operation modes (Silent, Medium, High, Auto)
• Target humidity (30, 40, 50, 60, 70, 80)
• Attributes (humidifier platform)

• Binary sensor entities

• Select entities

• Sensor entities

  • Humidity: The current humidity measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.
  • Water Level: The current water level percentage measured. Enabled by default.

• Switch entities

Air Humidifier JSQ/JSQ1/MJJSQ (deerma.humidifier.jsq, deerma.humidifier.jsq1, deerma.humidifier.mjjsq)

• On, Off
• Operation modes (low, medium, high, humidity)
• Target humidity (30, 40, 50, 60, 70, 80)
• Attributes (humidifier platform)

• Binary sensor entities

• Sensor entities|

  • Humidity: The current humidity measured. Enabled by default.
  • Temperature: The current temperature measured. Enabled by default.
  • Use Time: The accumulative number of seconds the device has been in use. Disabled by default.

• Switch entities

Standing Fan 1X (dmaker.fan.p5)

• Power (on, off)
• Operation modes (Normal, Nature)
• Oscillation (on, off)
• Number entities

• Switch entities

Standing Fan (zhimi.fan.za1, zhimi.fan.za3, zhimi.fan.za4, zhimi.fan.sa1)

• Power (on, off)
• Operation modes (Normal, Nature)
• Oscillation (on, off)
• Number entities

• Select entities

• Switch entities

DC Pedestal Fan (zhimi.fan.v2, zhimi.fan.v3)

• Power (on, off)
• Operation modes (Normal, Nature)
• Oscillation (on, off)
• Number entities

• Select entities

• Sensor entities

• Switch entities

Standing Fan 1C (dmaker.fan.1c)

• Power (on, off)
• Operation modes (Normal, Nature)
• Oscillation (on, off)
• Number entities

• Switch entities

Tower Fan/Standing Fan 2/Standing Fan Pro (dmaker.fan.p9, dmaker.fan.p10, dmaker.fan.p11)

• Power (on, off)
• Operation modes (Normal, Nature)
• Oscillation (on, off)
• Number entities

• Switch entities

Standing Fan 3 (zhimi.fan.za5)

• Power (on, off)
• Operation modes (Normal, Nature)
• Oscillation (on, off)
• Binary sensor entities

• Number entities

• Sensor entities

• Switch entities

Actions

Action humidifier.set_humidity

Set the target humidity.

Action humidifier.set_mode

Set the humidifier operation mode.

Action fan.set_percentage

Set the fan speed percentage.

Action fan.set_preset_mode

Set the fan operation mode.

Action xiaomi_miio.fan_reset_filter (Air Purifier 2 only)

Reset the filter lifetime and usage.

Action xiaomi_miio.fan_set_extra_features (Air Purifier only)

Set the extra features.

Xiaomi Air Quality Monitor

The xiaomi_miio Air Quality Monitor is observing your Xiaomi Mi Air Quality Monitor (PM2.5) and reporting the air quality index and other values.

Currently, the supported features are:

• Air Quality Index (AQI)
• Particulate matter 2.5
• Attributes
  • power
  • charging
  • battery
  • time_stat
  • carbon_dioxide_equivalent
  • total_volatile_organic_compounds
  • temperature
  • humidity

Xiaomi IR Remote

The xiaomi miio remote platform allows you to send IR commands from your Xiaomi IR Remote (ChuangmiIr).

Setup

Please follow the instructions on Retrieving the Access Token to get the API token to use in the configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file.

Configuring the Platform

To add a Xiaomi IR Remote to your installation, add the following to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file:

remote:
  - platform: xiaomi_miio
    host: 192.168.42.42
    token: YOUR_TOKEN

Full Configuration

remote:
  - platform: xiaomi_miio
    name: "bathroom remote"
    host: 192.168.42.42
    token: YOUR_TOKEN
    slot: 1
    timeout: 30
    commands:
      activate_towel_heater:
        command:
          - raw:base64:[optional_frequency]
      read_bad_poem:
        command:
          - raw:base64:[optional_frequency]
          - pronto:pronto_hex:[optional_repeat]

Add command as entity button to a dashboard

type: entity-button
tap_action:
  action: call-service
  action: remote.send_command
  data:
    command: activate_towel_heater
    entity_id: remote.xiaomi_miio_ir
hold_action:
  action: more-info
show_icon: true
show_name: true
entity: remote.xiaomi_miio_ir
icon: "mdi:radiator"
name: Activate Towel Heater

Use named commands to create UI buttons

script:
  towel_heater:
    sequence:
      - action: remote.send_command
        target:
          entity_id: "remote.bathroom_remote"
        data:
          command:
            - "activate_towel_heater"
  please_cover_your_ears:
    sequence:
      - action: remote.send_command
        target:
          entity_id: "remote.bathroom_remote"
        data:
          command:
            - "read_bad_poem"

Command Types

The Xiaomi IR Remote Platform currently supports two different formats for IR codes.

Raw

A raw command is a command learned from xiaomi_miio.remote_learn_command.

A raw command is defined as in the following example:

raw:Z6UFANEAAAAjAQAAAwkAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAQIAE=

with an optional last parameter of frequency:

raw:Z6UFANEAAAAjAQAAAwkAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAQIAE=:38400

Pronto Hex Code

A pronto hex code is a hex code often supplied by the device manufacturer.

A pronto hex code is defined as in the following example:

pronto:0000 006C 0022 0002 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0623 015B 0057 0016 0E6E

with an optional last parameter of repeats (required by some devices):

pronto:0000 006C 0022 0002 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0623 015B 0057 0016 0E6E:2

Note there are at least 4 versions of the Xiaomi IR Remote (ChuangmiIr) which can be recognized by their default hostname:

• chuangmi.ir.v2
• chuangmi.remote.h102a03
• chuangmi.remote.v2
• chuangmi.remote.h102c01

For now, pronto hex codes only work on the first version (chuangmi.ir.v2).

Actions

The Xiaomi IR Remote Platform registers four actions.

remote.send_command

Allows sending either named commands using an identifier or sending commands as one of the two types defined in Command Types.

xiaomi_miio.remote_learn_command

Used to learn new commands.

Use the entity_id of the Xiaomi IR Remote to start a learning process.

slot and timeout can be specified, but multiple commands learned to the same slot can still be sent using remote.send_command even if they are overwritten.

After learning the command the base64 string can be found as a notification in Overview, the string can be copied by left clicking on the string and choose the copy option.

xiaomi_miio.remote_set_led_on

Used to turn remote’s blue LED on.

xiaomi_miio.remote_set_led_off

Used to turn remote’s blue LED off.

Xiaomi Mi Robot Vacuum

The xiaomi_miio vacuum platform allows you to control the state of your Xiaomi Mi Robot Vacuum.

Currently supported actions are:

• start
• pause
• stop
• return_to_base
• locate
• clean_spot
• set_fan_speed Fan speeds: Silent, Standard, Medium, Turbo and Gentle (exclusively for mopping).
• xiaomi_clean_zone
• xiaomi_clean_segment
• xiaomi_goto
• remote_control_* (of your robot)

Actions

In addition to all of the actions provided by the vacuum integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] (start, pause, stop, return_to_base, locate, set_fan_speed and send_command), the xiaomi_miio platform introduces specific actions to access the remote control mode of the robot. These are:

• xiaomi_miio.vacuum_clean_zone
• xiaomi_miio.vacuum_clean_segment
• xiaomi_miio.vacuum_goto
• xiaomi_miio.vacuum_remote_control_start
• xiaomi_miio.vacuum_remote_control_stop
• xiaomi_miio.vacuum_remote_control_move
• xiaomi_miio.vacuum_remote_control_move_step

Action xiaomi_miio.vacuum_clean_zone

Start the cleaning operation in the areas selected for the number of repeats indicated.

• Data attribute: entity_id

  • Description: Only act on a specific robot.
  • Optional: No.

• Data attribute: zone

  • Description: List of zones. Each zone is an array of four integer values. These values represent two sets of x- and y-axis coordinates that describe the beginning and ending points of a square or rectangle cleaning zone. For example, [[23510,25311,25110,26361]] creates a box that starts in one corner at the 23510, 25311 (x- and y-axis) coordinates and then is expanded diagonally to the 25110, 26361 coordinates to create a rectangular cleaning zone.
  • Optional: No.

• Data attribute: repeats

  • Description: Number of cleaning repeats for each zone between 1 and 3.
  • Optional: No.

Example of xiaomi_miio.vacuum_clean_zone use:

Inline array:

automation:
  - alias: "Test vacuum zone3"
    triggers:
      - trigger: homeassistant
        event: start
    actions:
      - action: xiaomi_miio.vacuum_clean_zone
        target:
          entity_id: vacuum.xiaomi_vacuum
        data:
          repeats: "{{states('input_number.vacuum_passes')|int}}"
          zone: [[30914, 26007, 35514, 28807], [20232, 22496, 26032, 26496]]

Array with inline zone:

automation:
  - alias: "Test vacuum zone3"
    triggers:
      - trigger: homeassistant
        event: start
    actions:
      - action: xiaomi_miio.vacuum_clean_zone
        target:
          entity_id: vacuum.xiaomi_vacuum
        data:
          repeats: "{{states('input_number.vacuum_passes')|int}}"
          zone:
            - [30914, 26007, 35514, 28807]
            - [20232, 22496, 26032, 26496]

Array mode:

automation:
  - alias: "Test vacuum zone3"
    triggers:
      - trigger: homeassistant
        event: start
    actions:
      - action: xiaomi_miio.vacuum_clean_zone
        target:
          entity_id: vacuum.xiaomi_vacuum
        data:
          repeats: 1
          zone:
            - - 30914
              - 26007
              - 35514
              - 28807
            - - 20232
              - 22496
              - 26032
              - 26496

Action xiaomi_miio.vacuum_clean_segment

Clean the specified segment/room. A room is identified by a number. Instructions on how to find the valid room numbers and determine what rooms they map to, read the section Retrieving room numbers.

• Data attribute: entity_id
  • Description: Only act on a specific robot.
  • Optional: No.
• Data attribute: segments
  • Description: List of segment numbers or one single segment number.
  • Optional: No.

Example of xiaomi_miio.vacuum_clean_segment use:

Multiple segments:

automation:
  - alias: "Vacuum kitchen and living room"
    triggers:
      - trigger: homeassistant
        event: start
    actions:
      - action: xiaomi_miio.vacuum_clean_segment
        target:
          entity_id: vacuum.xiaomi_vacuum
        data:
          segments: [1, 2]

Single segment:

automation:
  - alias: "Vacuum kitchen"
    triggers:
      - trigger: homeassistant
        event: start
    actions:
      - action: xiaomi_miio.vacuum_clean_segment
        target:
          entity_id: vacuum.xiaomi_vacuum
        data:
          segments: 1

The original app for Xiaomi vacuum has a nice feature of room cleaning with repetition, you can achieve the same result with repeating segments:

automation:
  - alias: "Vacuum kitchen"
    triggers:
      - trigger: homeassistant
        event: start
    actions:
      - action: xiaomi_miio.vacuum_clean_segment
        target:
          entity_id: vacuum.xiaomi_vacuum
        data:
          segments: [1, 1]

Action xiaomi_miio.vacuum_goto

Go the specified coordinates.

• Data attribute: entity_id
  • Description: Only act on a specific robot.
  • Optional: No.
• Data attribute: x_coord
  • Description: X-coordinate, integer value. The dock is located at x-coordinate 25500.
  • Optional: No.
• Data attribute: y_coord
  • Description: Y-coordinate, integer value. The dock is located at y-coordinate 25500.
  • Optional: No.

Note: If your vacuum is in motion and does not respond to the xiaomi_miio.vacuum_goto command, call the vacuum.pause or vacuum.stop action first.

Action xiaomi_miio.vacuum_remote_control_start

Start the remote control mode of the robot. You can then move it with remote_control_move; when done, call remote_control_stop.

Action xiaomi_miio.vacuum_remote_control_stop

Exit the remote control mode of the robot.

Action xiaomi_miio.vacuuNm_remote_control_move

Remote control the robot. Please ensure you first set it in remote control mode with remote_control_start.

• entity_id: Only act on a specific robot. Not optional.
• velocity: Speed: between -0.29 and 0.29. Not optional.
• rotation: Rotation: between -179 degrees and 179 degrees. Not optional.
• duration: The number of milliseconds that the robot should move for. Not optional.

Action xiaomi_miio.vacuum_remote_control_move_step

Enter remote control mode, make one move, stop, and exit remote control mode.

• entity_id: Only act on a specific robot. Not optional.
• velocity: Speed: between -0.29 and 0.29. Not optional.
• rotation: Rotation: between -179 degrees and 179 degrees. Not optional.
• duration: The number of milliseconds that the robot should move for. Not optional.

Buttons

Sensors

Attributes

The vacuums from the xiaomi platform does not expose additional attributes other the ones provided by the vacuum integration,

Example on how to clean a specific room

Example script using vacuum.send_command to clean a specific room:

vacuum_kitchen:
  alias: "Clean the kitchen"
  sequence:
    - action: vacuum.send_command
      target:
        entity_id: vacuum.xiaomi_vacuum_cleaner
      data:
        command: app_segment_clean
        params: [18]

Where params specify room numbers, for multiple rooms, params can be specified like [17,18]. Instructions on how to find the valid room numbers and determine what rooms they map to, read the section Retrieving room numbers.

Example on how to reset maintenance hours (brushes, filter, sensors)

The vacuum entity stores attribute values for when brushes, filters and sensors need to be cleaned or replaced (main_brush_left, side_brush_left, filter_left and sensor_dirty_left). The values are measured in hours. Once the parts are cleaned or replaced you can then reset those values on the vacuum. Here is an example script using vacuum.send_command to reset the hours for the main brush:

reset_main_brush_left:
  alias: "Reset hours for main brush replacement"
  sequence:
    - action: vacuum.send_Command
      target:
        entity_id: vacuum.xiaomi_vacuum_cleaner
      data:
        command: reset_consumable
        params: ["main_brush_work_time"]

Allowed params for the reset_consumable command:

• ['main_brush_work_time']
• ['side_brush_work_time']
• ['filter_work_time']
• ['sensor_dirty_time']

Retrieving Zoned Cleaning Coordinates

Using FloleVac (Android)

1. Download FloleVac
2. Login with your Xiaomi credentials
3. Open Map (make sure you’re on the same network as your vacuum cleaner)
4. Select “Zone cleanup” and draw a box around the zone you’d like to clean
5. Long press “Cleanup” and the zone coordinates will be copied to your clipboard

Using RoboRock Control Center (requires Valetudo firmware)

RRCC supports both rooted and non-rooted Vacuums and acts as a mostly fully featured replacement for Mi Home that works locally without the cloud. If you have installed the rooted firmware Valetudo you are able to SSH into your Vacuum and enable MQTT plus use map functions with no cloud requirement.

Using the map editor you are able to acquire the coordinates required for zoned clean up. Here is an example script for zoned clean up:

vacuum_kitchen:
  alias: "vacuum kitchen"
  sequence:
    - action: vacuum.send_command
      target:
        entity_id: "vacuum.xiaomi_vacuum_cleaner"
      data:
        command: app_zoned_clean
        params: [[23084, 26282, 27628, 29727, 1]]

Retrieving Room numbers

Valid room numbers can be retrieved using miio command-line tool:

miiocli roborockvacuum --ip <ip of the vacuum> --token <your vacuum token> get_room_mapping

It will return the full mapping of room numbers to user-defined names as a list of (number,name) tuples. Alternatively, one can just test the clean_segment action with a number and see which room it cleans.

It seems to be the case that Numbers 1..15 are used to number the initial segmentation done by the vacuum cleaner itself. Numbers 16 and upwards numbers rooms from the users manual editing.

Xiaomi Philips Light

The xiaomi_miio platform allows you to control the state of your Xiaomi Philips LED Ball Lamp, Xiaomi Philips Zhirui LED Bulb E14 Candle Lamp, Xiaomi Philips Zhirui Downlight, Xiaomi Philips LED Ceiling Lamp, Xiaomi Philips Eyecare Lamp 2, Xiaomi Philips Moonlight Bedside Lamp and Philips Zhirui Desk Lamp.

Features

Philips LED Ball Lamp, Philips Zhirui LED Candle Lamp and Philips Zhirui Downlight

Supported models: philips.light.bulb, philips.light.candle, philips.light.candle2, philips.light.downlight

• Power (on, off)
• Brightness
• Color temperature (175…333 mireds)
• Scene (1, 2, 3, 4)
• Delayed turn off (Resolution in seconds)
• Attributes
  • model
  • scene
  • delayed_turn_off

Philips LED Ceiling Lamp

Supported models: philips.light.ceiling, philips.light.zyceiling

• Power (on, off)
• Brightness
• Color temperature (175…370 mireds)
• Scene (1, 2, 3, 4)
• Night light mode (on, off)
• Delayed turn off (Resolution in seconds)
• Attributes
  • model
  • scene
  • delayed_turn_off
  • night_light_mode
  • automatic_color_temperature

Philips Eyecare Smart Lamp 2

Supported models: philips.light.sread1

• Eyecare light (on, off)
• Ambient light (on, off)
• Brightness (of each light)
• Scene (1, 2, 3, 4)
• Night light mode (on, off)
• Delayed turn off (Resolution in seconds)
• Eye fatigue reminder / notification (on, off)
• Eyecare mode (on, off)
• Attributes
  • model
  • scene
  • delayed_turn_off
  • night_light_mode
  • reminder
  • eyecare_mode

Philips Zhirui Desk Lamp

Supported models: philips.light.mono1

• Power (on, off)
• Brightness
• Scene (1, 2, 3, 4)
• Delayed turn off (Resolution in seconds)
• Attributes
  • model
  • scene
  • delayed_turn_off

Philips Moonlight Bedside Lamp

Supported models: philips.light.moonlight

• Power (on, off)
• Brightness
• Color
• Color temperature (153…588 mireds)
• Scene (1, 2, 3, 4, 5, 6)
• Attributes
  • model
  • scene
  • sleep_assistant
  • sleep_off_time
  • total_assistant_sleep_time
  • brand_sleep
  • brand

Actions

Action xiaomi_miio.light_set_scene

Set one of the 4 available fixed scenes.

Action xiaomi_miio.light_set_delayed_turn_off

Delayed turn off.

Action xiaomi_miio.light_reminder_on (Eyecare Smart Lamp 2 only)

Enable the eye fatigue reminder/notification.

Action xiaomi_miio.light_reminder_off (Eyecare Smart Lamp 2 only)

Disable the eye fatigue reminder/notification.

Action xiaomi_miio.light_night_light_mode_on (Eyecare Smart Lamp 2 only)

Turn the smart night light mode on.

Action xiaomi_miio.light_night_light_mode_off (Eyecare Smart Lamp 2 only)

Turn the smart night light mode off.

Action xiaomi_miio.light_eyecare_mode_on (Eyecare Smart Lamp 2 only)

Turn the eyecare mode on.

Action xiaomi_miio.light_eyecare_mode_off (Eyecare Smart Lamp 2 only)

Turn the eyecare mode off.

Xiaomi Smart WiFi Socket and Smart Power Strip

The xiaomi_miio switch platform allows you to control the state of your Xiaomi Smart WiFi Socket aka Plug, Xiaomi Smart Power Strip and Xiaomi Chuangmi Plug V1.

Features

Xiaomi Smart WiFi Socket

Supported models: chuangmi.plug.m1, chuangmi.plug.m3, chuangmi.plug.v2, chuangmi.plug.hmi205, chuangmi.plug.hmi206

• Power (on, off)
• Attributes
  • Temperature

Xiaomi Chuangmi Plug V1

Supported models: chuangmi.plug.v1, chuangmi.plug.v3, chuangmi.plug.hmi208

• Power (on, off)
• USB (on, off)
• Attributes
  • Temperature

Xiaomi Smart Power Strip

Supported models: qmi.powerstrip.v1, zimi.powerstrip.v2

• Power (on, off)
• Wifi LED (on, off)
• Power Price (0…999)
• Power Mode (green, normal) (Power Strip V1 only)
• Attributes
  • Temperature
  • Current
  • Load power
  • Wifi LED
  • Mode (Power Strip V1 only)

Xiaomi Air Conditioning Companion V3

Supported models: lumi.acpartner.v3 (the socket of the acpartner.v1 and v2 isn’t switchable!)

• Power (on, off)
• Attributes
  • Load power

Actions

Action xiaomi_miio.switch_set_wifi_led_on (Power Strip only)

Turn the wifi LED on.

Action xiaomi_miio.switch_set_wifi_led_off (Power Strip only)

Turn the wifi LED off.

Action xiaomi_miio.switch_set_power_price (Power Strip)

Set the power price.

Action xiaomi_miio.switch_set_power_mode (Power Strip V1 only)

Set the power mode.

Retrieving the Access Token

Not recommended, please specify the cloud credentials during the config flow for easier setup. However when setting up a device manually the token can be retrieved in one of the following ways.

Xiaomi Cloud Tokens Extractor

One of Home Assistant users wrote a tokens extractor tool, which is currently the easiest way to retrieve tokens for all devices assigned to Xiaomi account. In the repository there’s executable for convenient use on Windows or Python script to be run on any platform. If you do not wish to run executable, then you can run it using the source code:

1. Install requirements:

pip3 install pycryptodome pybase64 requests

2. Run script

python3 token_extractor.py

3. Provide email address or username for Xiaomi’s account, password and country of the account (most used: CN - China Mainland, DE - Germany etc.)
4. Script will print out all devices connected to the account with their IP address and tokens for use in Home Assistant.

Xiaomi Home app (Xiaomi Aqara Gateway, Android & iOS)

1. Install the Xiaomi Home app.
2. Sign In/make an account.
3. Make sure you set your region to: Mainland China (Seems to be the longest line with Chinese characters) under settings -> Region (language can later be set on English).
4. Select your Gateway in Xiaomi Home app.
5. Then the 3 dots at the top right of the screen.
6. Then click on about.
7. Tap the version number (Plug-in version 2.77.1 as of January 2020, iOS has a white space instead of version number) at the bottom of the screen repeatedly.
8. You should now see 2 extra options listed in English (iOS still in Chinese), this means you enabled developer mode. [if not, try all steps again!].
9. Android: under “Hub info” there is quite some text in JSON format, this includes the “token” that you need. iOS: Most options are still in Chinese, you need the fourth item from the top.

Note: If you have multiple devices needing a token, e.g., Xiaomi Mi Robot Vacuum and a Xiaomi IR Remote, the above method may not work. The Xiaomi Home app will display a token, though it isn’t the correct one. The alternative method using “Mi Home v5.4.49” will provide the correct token.

Using Get Mi Home Devices Token App

If you are on a Windows or macOS device, you can use the Get MiHome devices token App to retrieve the token. Click the link, download the file that corresponds to your OS, enter your login details and it will retrieve the access token.

Alternative methods

Android (not rooted)

If using an Android device to retrieve the Access Token only v5.4.49 of Mi Home is confirmed working (December 2019).

1. To begin, set up your Robovac with the latest version of Mi Home on your primary Android device as you normally would.
2. If your Robovac is already set up, you must reset its WiFi settings for it to get a new token.
3. Using v5.4.49 of Mi Home locate a text file under the Smarthome/logs folder where the 32 character token is stored.
4. There will likely be several text files in this directory, search all of them for the word ‘token’ and you should find it there. Be advised that the latest version of Mi Home does not store the token in clear text.

Linux and Rooted Android

1. To begin, set up your Robovac with the latest version of Mi Home on your primary Android device as you normally would.
2. Ensure successful operation using the latest Mi Home app and give the Vacuum a static IP in your router or however you do that on your LAN.
3. Install version v5.4.54 of Mi Home on your rooted Android device and login (you can’t have two version of Mi Home installed at the same time).
4. Ensure you are using the same server every time
5. Ensure successful operation using 5.4.54 (locate is a nice simple test)
6. Using adb we will now extract the token from the rooted phone
7. Use adb shell to connect to your device and become root (if using Magisck root do adb shell -> su -> whoami to ensure root access.
8. Then run grep -R ‘“token”’ /data/data/com.xiaomi.smarthome and grab the token

iOS

1. Configure the robot with the Mi Home app. Make sure to select the correct region, as Xiaomi uses different product names for different geographical areas. Note that the new RoboRock app is currently not supported for this method.

2. Using iTunes, create an unencrypted backup of your iPhone. Since macOS 10.15 there is no iTunes app. Use Finder instead - after connecting your iOS device you should see it in left menu of Finder window.

3. Install iBackup Viewer, open it, and open your backup.

4. Open the “Raw Data” module.

5. Navigate to com.xiaomi.mihome.

6. Search for a file that looks like this: 123456789_mihome.sqlite (Note: _mihome.sqlite is not the correct file. Most likely, you will find this file in the Documents folder.)

7. Save this file to your filesystem.

8. Install DB Browser for SQLite.

9. Open DB Browser and load the .sqlite file you saved from your backup.

10. Click on the Execute SQL tab.

11. Input and run this query (use appropriate SELECT query for your device i.e. Vacuum, Powerstrip or Plug):

    -- Execute to retrieve token for Vacuum
    SELECT ZTOKEN FROM ZDEVICE WHERE ZMODEL LIKE "%vacuum%"
    
    -- Execute to retrieve token for Smart Powerstrip
    SELECT ZTOKEN FROM ZDEVICE WHERE ZMODEL LIKE "%powerstrip%"
    
    -- Execute to retrieve token for Smart Plug
    SELECT ZTOKEN FROM ZDEVICE WHERE ZMODEL LIKE "%plug%"
    

12. Copy the returned 96-digit hexadecimal string to your clipboard.

13. Open Terminal and execute this command:

    echo '0: <YOUR HEXADECIMAL STRING>' | xxd -r -p | openssl enc -d -aes-128-ecb -nopad -nosalt -K 00000000000000000000000000000000
    

14. Use the resulting 32-digit string as your token. (On your mac in front of the terminal session)

Bluestacks

1. Configure the robot with the Mi-Home app. Make sure to select the correct region, as Xiaomi uses different product names for different geographical areas. Note that the new RoboRock app is currently not supported for this method.
2. Install BlueStacks.
3. Set up Mi Home version 5.4.49 in BlueStacks and login to synchronize devices.
4. Open Filemanager in the More Apps menu.
5. Use Explore on the left and navigate to sdcard/SmartHome/logs/plug_DeviceManager.
6. Click on Export to Windows in the lower left corner and select any or all files to export to you local disk.
7. Search for "token":"<yourTokenHere>".

Miio command line tool

Use of Miio should be done before the Vacuum is connected to Mi Home. If you already connected to the app you will need to delete it and then join the ad-hoc Wi-Fi network the Vacuum creates. If the vacuum is already paired it’s likely this method will only return ??? as your token.

Discovering devices on the current network:

npx miio discover

This will list devices that are connected to the same network as your computer. Let it run for a while so it has a chance to reach all devices, as it might take a minute or two for all devices to answer.

The commands outputs each device on this format:

Device ID: 48765421
Model info: zhimi.airpurifier.m1
Address: 192.168.100.9
Token: token-as-hex-here via auto-token
Support: At least basic

The information output is:

• Device ID - The unique identifier of the device, does not change if the device is reset.
• Model ID- The model id if it could be determined, this indicates what type of device it is.
• Address - The IP that the device has on the network.
• Token - The token of the device or ??? if it could not be automatically determined.

Xiaomi Cloud Tokens Extractor

Alternate method to get all yours devices tokens in one run. Please follow this instruction.