2026.4.0
Home ▸ Integrations

Qube Heat Pump

The Qube Heat Pump integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to control and monitor Qube heat pumps via the Modbus TCP protocol.

Supported devices

The following devices are known to be supported by the integration:

  • Qube heat pump

Unsupported devices

The following devices are not supported by the integration:

  • Qbooster heat pump (the predecessor of the Qube heat pump)

Configuration

To add the Qube Heat Pump hub to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select Qube Heat Pump.

  • Follow the instructions on screen to complete the setup.

Host

The IP address or hostname of your Qube Heat Pump (default is qube.local).

Configuration options

After configuration, you can change the following settings by selecting Configure on the integration entry:

Host

Update the IP address if it changes.

Label

An optional label to append to entity names (useful for differentiating multiple units).

Supported functionality

The Qube Heat Pump integration exposes various entities to monitor and control your heat pump.

Sensor

  • Temperatures: inlet (°C), outlet (°C), minimum and maximum setpoints (°C), outside temperature (°C), central heating (CH) and domestic hot water (DHW) temperatures (°C).
  • Flow: Current flow rate (L/min).
  • Power: standby power and total electric power (W).
  • Status: Operation hours (h).

Removing the integration

This integration follows standard integration removal.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.