EZVIZ
The ezviz sensor platform uses the ezvizlife.com API to interact with the devices.
It also exposes an RTSP stream, by using the local camera IPs (so the device hosting Home Assistant has to be able to access the local IP of the cameras).
As there is no official documentation for the API, the integration retrieves data from the API used in the EZVIZ mobile app, hosted here
The password for each camera is usually written near the QR code. This could be underneath the device or in the user manual. It is usually referred to as the camera “verification code”.
The local RTSP server on your camera needs to be enabled. To do that:
- Open the EZVIZ mobile app.
- Select the profile icon.
- Navigate to Settings > LAN Live View > Start Scanning.
- Select your camera.
- Select the gear-like icon in the top-right corner > Local Server Settings > enable RTSP.
Configuration
To add the EZVIZ integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select EZVIZ.
-
Follow the instructions on screen to complete the setup.
Your cameras will now show under integration options as “discovered devices”. Please complete the setup for each camera to see the video stream within Home Assistant.
You can also change the camera options should you need to access a high or low res stream. Generally, though it will just work without any modification to options.
Integration entity options
Request Timeout (seconds):
-
This option determines the duration Home Assistant waits for data from the EZVIZ API before giving up. This timeout is specified in seconds. If the API response takes longer than the specified timeout, Home Assistant will stop waiting and assume the request has failed. Adjust this value according to your network conditions and the responsiveness of the EZVIZ API. A higher timeout may be necessary for slower connections.
-
Example: If you set the Request Timeout to 30 seconds (default option), Home Assistant will wait up to 30 seconds for a response from the EZVIZ API before timing out.
-
Please note this only works on the main EZVIZ cloud entity.
Arguments passed to ffmpeg for cameras:
-
This option allows you to define additional parameters for capturing footage from your EZVIZ cameras. While camera resolution and codec settings are typically configured in the “Ezviz Studio” desktop application, you can use this option to select the desired stream or substream for capturing the footage.
-
To choose the appropriate stream or substream, specify the corresponding channel path in the
Arguments passed to ffmpeg for camerasfield. The channel path identifies the specific stream or substream of the camera. -
Example: If you want to use the camera’s substream, you can specify the channel path as
/Streaming/Channels/102. Alternatively, if you prefer the main stream, use/Streaming/Channels/101. You can also configure multiple stream/substream options based on your camera’s capabilities and resource requirements. -
Cameras typically default to the main stream if this is invalid or not specified.
-
Please note this only works on the camera entities.
Action ezviz.alarm_sound
If your EZVIZ camera supports warning sounds, you can use this action to set the intensity.
| Data attribute | Description |
|---|---|
entity_id |
String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all. |
level |
Set the sound level to 0 for Soft, 1 for Intensive or 2 to disable |
Action ezviz.ptz
If your EZVIZ camera supports PTZ, you will be able to pan or tilt your camera.
| Data attribute | Description |
|---|---|
entity_id |
String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all. |
direction |
Direction of the movement. Allowed values: up, down, left, right
|
speed |
(Optional) Speed to in which to move the camera. Allowed values: int from 1 to 9. Default: 5 |
Action ezviz.set_alarm_detection_sensibility
If your EZVIZ camera supports motion detection, you will be able to set the sensitivity level using this action.
| Data attribute | Description |
|---|---|
entity_id |
String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all. |
level |
Sensibility level (1-6) for type 0 (Normal camera) or (1-100) for type 3 (PIR sensor camera). |
type_value |
Type of detection. Options : 0 - Camera or 3 - PIR Sensor Camera. |
Action ezviz.sound_alarm
If your EZVIZ camera has a built-in siren, you can use this action to make a noise.
| Data attribute | Description |
|---|---|
entity_id |
String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all. |
enable |
Sound the alarm by setting this to 1 or stop the siren by setting this to 0. |
Action ezviz.wake_device
If you have “sleep” mode enabled on your camera, you can use this action to wake it. Especially useful for battery cameras.
| Data attribute | Description |
|---|---|
entity_id |
String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all. |
To enable/disable motion detection, use the Home Assistant built in actions.
Action camera.enable_motion_detection
| Data attribute | Description |
|---|---|
entity_id |
String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all. |
Action camera.disable_motion_detection
| Data attribute | Description |
|---|---|
entity_id |
String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all. |
Alarm control panel entity
The Alarm control panel entity in the EZVIZ platform allows users to manage and control the armed status of all their EZVIZ devices. With this entity, users can choose between three options: Arm Away, Arm Sleep, and Disarm.
OTA update
Trigger device OTA firmware update process for latest stable version.
Motion detection sensitivity
The motion detection sensitivity can be adjusted using the “Detection sensitivity” Number entity. It’s important to note that this entity fetches information from the device and will not update if your battery-powered camera is in sleep mode, as this measure is implemented to preserve battery life and prevent excessive drainage.
Siren
The Siren entity allows you to activate the Alarm function on the device. In most cameras, the Alarm function incorporates a strobe light and/or an audible siren that is designed to deter potential intruders. Once triggered, the siren will automatically deactivate after 60 seconds (EZVIZ does this, not done via integration). Alternatively, you can manually deactivate the siren by using the entity.
PTZ
PTZ up/down/left/right buttons are available on supported PTZ cameras for pan and tilt control.
Warning sound
If your camera supports motion detection warning sounds, you can use this entity to select the level.
Light entity
A light entity will be added to cameras + light combos. You can turn it on/off and set the brightness.
Image entity
The image entity represents the last detected event from a camera and visually represents the event within Home Assistant.
Troubleshooting
-
authentication failed: The authentication requires an EZVIZ account with two-step verification disabled. Google, Facebook, TikTok, or other Oauth-based accounts will not work.